Страница 1: ......
Страница 2: ...able through the wiring hole on the back cover 5 Mount the back cover to the wall using four mounting screws 6 Connect the cable to the terminal block on the ProGuard Interphone as follows White VPP White OUT microphone Blue IN speaker Orange GND Note The VPP wire is labeled for convenience 7 Plug the cable into the RJ 11 jack on the ProGuard Main board 8 Replace the front cover and secure using t...
Страница 3: ...clockwise to decrease sensitivity Enabling the Interphone in Programming The ProGuard control panel s Microphone Speaker options allow you to choose which microphone and speaker shall function during Two Way Audio communication Choose External to enable the Interphone to function exclusively or Internal External to enable the Interphone to function simultaneously with the ProGuard s internal micro...
Страница 4: ... MARMITEK 4 ...
