18
One Chirp
Two Chirps
Three Chirps
Four Chirps
Button
LED One Pulse
LED Two Pulse
LED Three Pulse
LED Four Pulse
(Factory Default Setting)
Brown Wire
5-Second Pulse
Siren Output
ON
Turn On the Ignition
3 long chirps & 3 flashes of the parking lights will con-
firm exit of the programming mode.
Note: Waiting 15 seconds after the last command will
also cause the system to automatically exit the program-
ming mode.
Step 4
Step 3
Remote Feature Programming
Use the transmitter buttons as illustrated to adjust the features required. Keep re-pressing the transmitter button that
relates to the feature you want to adjust until the correct amount of chirp/beeps is heard. Move on to the next feature.
0.8 Second
Door Lock Pulses
3.5 Second
Door Lock Pulse
Double Pulse Unlock
Ignition Controlled
Door Lock Only
Ignition Controlled
Door Unlock Only
Ignition Controlled
Door Lock & Unlock
Without Ignition Controlled
Door Lock and Unlock
Pathway Illumination
Feature “Off”
Parking Light “On” for
30-Seconds Upon an
Unlock Signal
Brown Wire
Constant Siren Output
Parking Light “On” for
30-Seconds Upon an
Unlock Signal & 10 Second
Upon a Lock Signal
Brown Wire
Horn Output
Door Lock with
“Comfort Feature”
See Note Below
No Function
Note “Comfort Feature”: Some vehicles (Mercedes, BMW, VW, Opel, etc.) have a special “Comfort Feature”.
When you lock the door with the key, you just have to keep on turning the key in the door for about 5 or 7 sec-
onds and the window will close directly.
If your vehicle has “Comfort Feature” and you wish the door being locked and the window being closed automat-
ically at the same time by remote control, you can set the alarm feature with “Comfort Feature”.
Disables the Out-of-
Range Check
+
Enables the Out-of-
Range Check
(Factory Default Setting)
Turbo Timer Control
Function is Off.
The alarm can not be armed
while the engine is running.
+
Button
One Chirp, LED One Pulse
Two Chirps, LED Two Pulses
Three Chirps, LED Three Pulses
The vehicle has an aftermarket
turbo timer installed.
The alarm system can be armed
with the engine running. The
shock sensor will be bypassed
as long as the engine is running.
The vehicle has an aftermarket
turbo timer installed.
the alarm system can be armed
with the engine running. The
shock sensor will be bypassed
for 3 minutes.
Four Chirps, LED Four Pulses
Five Chirps, LED Five Pulses
Six Chirps, LED Six Pulses
Built-in Turbo Timer Control is
Active
Press the ( + ) buttons
before removing the ignition
key to activate the 1 minute
Turbo timer control. The alarm
system can be armed and the
shock sensor will be by-passed.
Built-in Turbo Timer Control is
Active
Press the ( + ) buttons
before removing the ignition
key to activate the 3 minute
Turbo timer control. The alarm
system can be armed and the
shock sensor will be by-passed.
Built-in Turbo Timer Control is
Active
Press the ( + ) buttons
before removing the ignition
key to activate the 5 minute
Turbo timer control. The alarm
system can be armed and the
shock sensor will be by-passed.
M8A-IM.qxp 4/26/05 15:56 Page 18
