parts, mounting, and any other conditions that may affect its operation.
- A guard or other part that is damaged should be properly repaired or replaced by an
authorised service centre unless otherwise indicated elsewhere in this instruction manual.
Have defective switches replaced by an authorised service centre. Do not use tool if switch
does not turn it on and off.
20. Warning
- The use of any other accessory or attachment other than that recommended in this
operating instruction might present a risk of personal injury.
21. Have your tool repaired by an expert
- This electric appliance is in accordance with the
relevant safety rules. Only experts may carry out repairing of electric appliances otherwise it
may cause considerable danger for the user.
22. connect the dust extraction device
- Wherever there are facilities for fitting a dust
extraction system, make sure it is connected and used.
23. Noise level
- The noise level of this power tool is measured according to IEC 59 co 11, IEC
704, DIN 45635 Part 21, NFS 31081 (84/537IEWG). Noise level at work area can exceed 85 dB
(A). In that case operators should protect themselves against damage to hearing - wear ear
defenders.
WARNING:
THIS PRODUcT OPERATES AT 230 vOLT Ac SINGLE PHASE MAINS vOLTAGE.
READ ALL THE SAFETY INSTRUcTIONS BEFORE USING THE MAcHINERY.
OBSERvE ALL THE LOcAL SAFETY REGULATIONS.
This product Is “CE” marked and complies with all the relevant European CE directives for LVD,
EMC and Machinery safety.
cORREcT DISPOSAL OF THIS PRODUcT
This marking indicates that this product should not be disposed with other household
wastes throughout the EU. To prevent possible harm to the environment or human
health from uncontrolled waste disposal, recycle it responsibly to promote the
sustainable reuse of material resources. To return your used device, please use the
return and collection systems or contact the retailer where the product was purchased.
They can take this product for environmental safe recycling.
