2
INSTALLATION
Introduction
Market Forge tilting direct steam jacketed kettles of two
capacities, each mounted in a modular stainless steel
cabinet.
Double wall construction around the lower half of the
kettle forms a surrounding chamber into which steam is
introduced as a source of heat for cooking.
Steam input plumbing is equipped with a manual control
valve. Condensate is removed through a steam trap con-
necting with the kettle drain plumbing assembly. A swivel
spout, hot-cold combination faucet provides a source of
water for addition to the kettle for cooking and cleaning.
Large capacity kettles are fitted with heavy duty tilting
mechanisms operated by removable hand crank. Each
model is equipped with a pan support which maintains
continuous alignment of serving pans under the pouring
spout at all levels of kettle elevation. Counterbalanced
hinged lids cover the kettles in the lowered position. All
are plumbed for direct connection to a remote steam
source.
Applicable model designation includes:
• MT-25 (25-gallon) – 36” wide (914mm) cabinet base
• MT-40 (40-gallon) – 36” wide (914mm) cabinet base
Service:
Required service, both repair, replacement, and adjust
-
ment is explained in Adjustments section of this manual.
Other service help can be found in the Trouble Shooting
and Maintenance sections of this manual. Should repairs
be required, a network of Authorized Service Agents is
available to assist with prompt service. A current list of
Authorized Service Agencies may be obtained by contact
-
ing Market Forge direct of going on our website www.mfii.
com.
The model and serial number must be referenced when
corresponding with Market Forge. These numbers can
be found on the data plate located on the upright frame
behind the cabinet base door. If you require further as
-
sistance in obtaining these numbers, please contact us
directly.
