Market Forge Industries 2624, Руководство пользователя

Страница: 12 / 36

2624, 2624S, 2636, 2636S Griddle
CLEANING / PREVENTIVE MAINTENANCE
Cleaning procedures for griddle and stainless steel surfaces:
1. Suggested tools: Rubber Squeegee, rubber or plastic
scrapers, plastic wool, cloth, griddle cleaner and sanitizer.
2. Precautions: Before any cleaning, reduce temperature to
325 o F.
3. Remove glass lids and divider. CAUTION: LIDS AND
DIVIDER MAY BE HOT!
4. Clean all food contact surfaces as soon as possible after
use, preferably while the griddle is still hot. Scrape
griddle with a spatula to remove loose food debris. BE
CAREFUL NOT TO SCRAPE THE GRIDDLE SUR-
FACE WITH METAL UTENSILS.
5. Prepare a solution of griddle cleaner as instructed by the
supplier, clean the griddle surface thoroughly.
6. To remove materials stuck to the surface use a brush,
sponge, cloth, rubber scraper, plastic scraper or plastic
wool along with the detergent solution. To minimize the
effort required in washing let the detergent solution sit
on the unit and soak into the residue or heat the detergent
briefly. DO NOT use any abrasive materials or metal
implements that might scratch the surface. Scratches
make the surface hard to clean and provide places for
bacteria to grow. DO NOT use steel wool which may
leave particles imbedded in the surface, causing corro-
sion and pitting.
7. Rinse the griddle thoroughly with clean water.
8. When the equipment needs to be sanitized, use a sanitiz-
ing solution. Contact our factory to ask which sanitizing
solution is best. Follow the instructions on the sanita-
tion solution bottle and apply to the unit after it has been
cleaned and drained. Rinse off the sanitizing solution
thoroughly with clean water.
9. Turn the griddle on and allow surface to heat up enough
to dry thoroughly. Once dry, coat the griddle surface
with a thin layer of liquid shortening.
Cleaning the glass lids:
A. During daily cooking, the glass lid window can be
cleaned using a rubber squeegee and a wet towel.
B. The lids can be removed and placed into the dish-
washer for easily cleaning.
WARNING:
KEEP WATER AND SOLUTIONS AWAY FROM CONTROL PANEL! NEVER HOSE OR SPRAY
CONTROL PANEL OR OUTSIDE OF UNIT!
DE-SCALING STEAM GENERATOR:
CAUTION: DO NOT USE “LIME AWAY” OR OTHER HIGH
ACID DELIMING SOLUTIONS (if they cause excessive foam-
ing).
USE WHITE VINEGAR OR CITRUS BASE DE-SCALING
CHEMICALS. Use a minimum of 32 oz. of citrus de-scaler solu-
tion.
De-scaling os steam generator: (Every 60 days, more if you have
hard water) This procedure must be done while steam generator is
off and all lids are pulled forward and in the closed position.
Power off steam generator.
Remove steam cap inspection plate located on topside of
power head.
Ensure release of pressure by rotating 1/4 turn. Remove cap.
Drain water from steam generator using valve located at the
bottom center of griddles backside.
Close drain valve after draining is complete. 1.
2.
3.
4.
5.
Add 32 oz. of de-scaling solution & 3 qts. of clean water
through fill opening.
Replace cap by tightening fully.
Power on steam generator.
Allow generator to reach operating temperature.
Close lids and pull forward slightly to deactivate steam injec-
tion. Allow steam generator to cycle for 15-20 minutes.
Push lids forward to allow steam injection to operate for 10
minutes to allow de-scaling of steam nozzle lines.
Power steam generator off and allow 5 minutes for pressure
relief.
Repeat steps 3-6.
Add 1 gallon clean water through fill opening.
Repeat steps 5-6 to flush de-scaling solution.
Again add 1 gallon of clean water through fill opening.
Replace cab by tightening fully.
Power on steam generator as normal for continued operation.
Alternate method:
turn power off to steam generator.
Let solution set overnight.
Follow steps 2-18 above.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
1.
2.
3.
10