MARKEM Cimjet RFID, Руководство по эксплуатации и обслуживанию, Страница: 96 / 158

SECTION 6 Preventive Maintenance Guide
6–2
m
®
0855904enb 4/05
2.0 Cleaning of All Rollers
When tags are fed, the tag adhesive may bleed onto the backing
web. This adhesive can build up on the feed roller, tag nip, and idler
rollers which may eventually cause feed problems.
To prevent these problems, the machine must be cleaned regularly
using a suitable cleaning agent such as Isopropanol. Care must be
taken when cleaning to prevent damage to the machine and its
delicate components. Cleaning agents which will damage rubber or
plastic
MUST NOT be used. If in doubt, consult MARKEM.
It is recommended that the rollers be cleaned regularly every time
the tags are replaced and before using the machine if it has not
been operated for several days.
• Turn off power to the machine and remove tags
• Use a cotton swab or soft cloth, moistened in Isopropanol, to
remove any residue from the feed roller and the idler rollers
Note: NEVER use abrasive materials or sharp instruments such as
screwdrivers
Refer to safety information in Section 1 – General Information
before using the Isopropanol.