Marine PC MPC-ML10DVR, Руководство пользователя

Страница: 6 / 32

6
MPC-ML10DVR-UM(B) 4/2011
MONITOR OPERATION
Terminate Positive cable lead to 10-36 VDC positive voltage source and Negative lead
to negative voltage source. Plug in cable (supplied by Marine PC or FBO) into J1 and
turn CW to lock. (Connecting cable to J2 is only necessary for download.)
Connect at least one RS-170 device (camera, typically) to any of the three input
cables, marked 1, 2, 3, using standard BNC coax connector. Make sure the video
device is turned on and providing a signal to the MPC-ML10DVR.
Press Power On-Off Button once to turn on unit. After a few seconds of a power up
routine, the first operational signal being received will be displayed. The LED back -
light will automatically come on at about half brightness.
Adjust brightness by repatedly pressing the Brightness Up or Down button. Adjust to
the lowest setting which still allows ease of viewing. The last step of the Brightness
Down control is Backlight OFF. From this last step, pressing the Brightness Up button
one short time will put the backlight in the lowest possible setting of ~ 1 nit.
NOTE: Using the lowest brightness setting (backlight off) maintains power to the
other internal electronics and keeps them fully functional, including DVR recording,
while saving power and night vision. Pressing the brightness button will then allow
the backlight to come on and immediately display the video input and any record-
ing function in progress. Using the Power On-Off button will turn off all electronics,
including DVR recording and the video processor. Turning the unit back on this way
will initiate a several second delay while all electronics initializes.
Power On-Off
Brightness Up
Brightness Dn
OSD Select
Next
Previous
Record On-Off
Rewind
Fast Forward
Stop
Source Select
DVR Functions Monitor Functions
Play - Pause
QUICK START