Marine PC MPC-ML10DVR, Руководство пользователя

Страница: 12 / 32

12
MPC-ML10DVR-UM(B) 4/2011
This MPC-ML10DVR Monitor has been designed to provide optimum performance and ser-
vice without any required scheduled maintenance other than occasional cleaning.
Display Screen Cleaning
• A vinegar-based cleaner is preferred to prevent streaking and degradation of the
coatings, or
• A non-abrasive glass cleaner such as a professional foam glass cleaner
• Apply the cleaning solution to a soft clean cloth, dampening slightly
• Keep a fresh side of the cleaning cloth towards the screen surface to avoid
scratching it with accumulated grit, and
• To minimize the risk of abrasion to the screen, air drying is recommended.
Monitor Enclosure
• Clean the unit enclosure with a soft clean cloth lightly dampened with a
general purpose mild detergent solution
• To rinse, wipe down with clean water, and
• Dry with a soft clean cloth.
PRODUCT CARE AND MAINTENANCE
Product Care
• Do not use abrasive cleaners or solvent-based (flammable) cleaners on the
Flat Panel or Touch Screen Display, its enclosure or any other electrical device
(cables, power cord, etc)
• Do not use paper products as they may scratch the Display screen, and
• Do not directly apply cleaning solutions to the Display screen.
Turn off the Monitor power before cleaning the Monitor screen, or unit’s enclo-
sure.
WARNING!
CAUTION!
In marine or similar environments,
an added benefit of a vinegar-based
cleaner is its effectiveness in
dissolving salt deposits.
To avoid risk of electrical shock, do not disassemble the unit’s enclosure. Users
cannot service the Monitor. User maintenance is restricted to cleaning, as explained.
Disassembling the unit voids the warranty.
Long-term Storage
• For long-term storage, it is suggested the unit be stored in a normal indoor environ -
ment and the Display glass be protected from accidental damage.
• For pedestal mount units, disconnect the cable(s) and loosen the arm adjustment to a
point where the ball can be removed from the arm, or
• For Flush or Panel Mount units, cover the product with a protective covering that shall
not scratch or transfer any dyes to the Display screen.
WARNING!