Marine PC MPC-AWM3V Скачать руководство пользователя страница 7 | Manualshive

Страница: 7 / 20

Marine PC MPC-AWM3V Скачать руководство пользователя страница 7

UM-MPC-AWM3V(A) 10/2011

Electrical

Connecting Cables

• Disconnect the power when the Monitor is being installed, and
• Upon installation, verify the power connector is securely seated on the unit.

Power Source

This unit may be operated directly from a DC power source, or from AC with an external AC/DC

power converter..

• Use the supplied power cable, and
• Always connect to a properly grounded power source.

Fluids from LCD Display

• If the Monitor should ever become shattered, do not touch fluids from an LCD Display

• If fluid should get on hands or clothing, immediately wipe off with liquid soap or rubbing alcohol on

a clean towel; wash with water; immediately consult with a doctor, and

• If fluid gets in the eyes, flush eyes immediately with water for a minimum of 15 minutes; consult with

a doctor.

caution!

7

Protection on Servicing

Servicing - User

• User product servicing is limited to cleaning the unit
• Do not disassemble or modify the unit to avoid the possibility of an electrical shock, damage

to electrical components or scratching the Display surface, and

• Disassembly voids the warranty.

Servicing - Marine PC

Marine PC Qualified Service Personnel may be required if the unit:

•  Does not operate normally when installation instructions are followed
•  Does not operate normally when operating instructions are followed
•  Has been dropped or damaged, or
•  Exhibits a distinct change in performance, indicating a need for service.

Shipping

If the unit should need to be shipped to the Marine PC Service Center, the original packing
material should be used to insure safety of the unit in shipping. Repack the unit as it
would have originally been received from Marine PC.

This product has been engineered to meet or exceed international industry standards

addressing product design and enclosure protection against EMI/RFI when installed

with the factory provided cables.

EMI/RFI

caution!

«
...
5
6
7
8
9
...
»

Содержание MPC-AWM3V





















Отзывы:

Нет отзывов