
UM-MPC-AWM3V(A) 10/2011
14
OPERATOR CONTROLS
On the right hand side of the Monitor
bezel are six Operator Control buttons.
Up/Right Arrow
Down/Left Arrow
Power On/Off (I/O)
Button
Large sun
OSD Select Button
Adjust the brightness of the Display to the lowest possible setting for
a given set of conditions and display characteristics. Doing so will
provide the best viewing of the image, extend the life of the
backlight and reduce the internal heat of the Display.
Brightness
Control
Small sun
Select Button
The Select Button is the access point to the On-Screen Display (OSD) Source Screen Function
Menu and used for making selections from the OSD Menus. (See On-Screen Display.)
Up/Right Arrow Button
The Right Arrow Button is an adjustment tool in the On-Screen Display (OSD) Source Screen Con-
trols Menu. (See OSD Screen Control Menu Categories.)
Down/Left Arrow Button
The Down/Left Arrow Button is an adjustment tool in the On-Screen Display (OSD) Source Screen
Controls Menu. (See OSD Screen Controls Menu Categories.)
Source Select Button
The Source Select Button is used to select an Input Source when more than one Input is available.
Pushing this button will advance from the first connected source to the next and then return to
the first source in a circular fashion.
Brightness Buttons
These buttons control the brightness of the LCD Panel Display.
• The large sun button, when repeatedly pressed or held down, will cause the
Display’s backlight brightness to increase.
• The small sun button, when repeatedly pressed or held down can be stepped down in incre
-
ments to the lowest setting, which is backlight Off, but the electronics are still on and synced
with the input signals. One step from the last is the lowest setting, and is suitable in very
subdued light, as in night time operations.
Optional Feature:
Monitor defaults to an AUTO-
ON state when power is applied. This feature must be
ordered when the Monitor order is placed. It is not
available after the unit is built.
Power Button
Note: Monitor defaults to an AUTO-OFF state
when power is applied.
• The Power On/Off button is marked with
the I/O (Input/Output) symbol
• Momentarily pressing this button will
turn ON or turn OFF the unit.
• Blue LEDs located under the buttons glow
when the unit is powered on.
Source Select Button