19
Module Status
If you have opened the Presenter-to-Go Palm application without the module installed and powered you
will get the “Presenter module not detected” message.
Fig 9.3: “Presenter module not detected”
Note: If the module is inserted, but the VGA adapter and A/C adapter are not connected then the
Application will show the “Presenter module not detected” state. You will still be able to review and
reorganize mobile presentations in the Visor memory, but you will not be able to review presentations in
the Presenter-to-Go memory or make presentations.
The About Screen:
Fig 9.4 Information Screen
Figure 9.5 Tips Screen
Tapping on the information indicator when the module is powered will give you the
Presenter-to-Go information screen. Tapping the information indicator when the module
is not powered will give you a Tip Screen that explains how to power the module.
