Maretron DSM570, Руководство пользователя

Страница: 34 / 283

DSM570
User’s Manual
Page 18 Revision 1.8.3
4.2.20 Pressure/Vacuum
Altimeter
– displays the current altimeter pressure reading
Barometric
– displays the current atmospheric (barometric) pressure
Compressed Air
– displays the current pressure of compressed air
Engine Boost
– displays the boost pressure of a supercharger or turbocharger
Engine Coolant
– displays the coolant pressure for an engine
Engine Fuel
– displays the fuel pressure for an engine
Engine Oil
– displays the oil pressure for an engine
Filter
– displays the current pressure at a fuel filter
Fuel
– displays the current fuel pressure
Hydraulic Oil
– displays hydraulic oil pressure
Oil
– displays the current oil pressure
Steam
– displays steam pressure
Transmission Oil
– displays oil pressure for a transmission
User Defined 129
– User Defined 144 – displays pressure from a pressure sensor of a user-
defined type
Water
– displays water pressure
4.2.21 Rudder
The DSM570 supports the display of information for up to four rudders.
Rudder Angle & Order
– displays the angle of the vessel’s rudder as indicated by the rudder
sensor, as well as the angle to which the rudder has been commanded by an autopilot or
steering device
4.2.22 SMS (Text) Status
Status
– displays the status of the Maretron SIM100 SMS (Text) device
Signal Strength
– displays the signal strength of the cellular network
Indicator
– displays whether the Maretron SIM100 SMS (Text) device has a connection to the
cellular network
4.2.23 Special Device
Watermaker
– displays a screen with several different parameters associated with Sea Recovery
watermakers
4.2.24 Speed
Speed Through Water
– displays the speed of the boat relative to the water
Speed Over Ground
–
displays Speed over Ground (relative to the earth, not the water)
Total Log
– displays the total distance traveled by the vessel since the log indicator was installed
Trip Log
– displays the distance traveled by the vessel since the trip indication of the log indicator
was last reset (the trip log value from log transducers that are capable of being reset via the
NMEA 2000
®
command of the Distance Since Last Reset field of the 128275 Distance Log
message, such as the Maretron DST110, may be reset with the control mode of the display
–
see Section 5.2.7.14 for details)