Maretron DSM410, Руководство пользователя

Страница: 232 / 289

DSM410
User’s Manual
Page 216 Revision 1.7.2
7.8 Half Gauge Display
The Half Gauge display shows the selected parameter value in a graphical format resembling a
semicircular analog gauge. A full screen example of a half gauge display can be seen in below.
Figure 250
– Half Gauge Display Example
7.9 Indicator Light
The DSM410 is capable of displaying the state of binary (ON/OFF) sensors on the network with an
indicator light display that emulates a status light on a control panel.
The display may be set up in several different configurations:

Single-Indicator Light
– this creates a single indicator light

2 rows
– this creates four rows of single indicator lights

3 rows
– this creates three rows of single indicator lights

4 rows
– this creates four rows of single indicator lights

2 rows, 2 columns
– this creates two rows by two columns of a single indicator light
Figure 271 b
elow shows a Favorite Screens Setup screen with a single window configured with the “4
rows” configuration.