Maretron DSM410, Руководство пользователя

Страница: 224 / 289

DSM410
User’s Manual
Page 208 Revision 1.7.2
Figure 238
– Setting the Barometric Pressure
Use the Increase and Decrease buttons to select the correct pressure, and the press the Enter
button to store it.
6.32.6 Outside Humidity
The Humidity is pre-calibrated before leaving the factory, and should not require adjustment. However
the current humidity level may be entered in this screen to re-calibrate the WSO100 should this be
required.
Figure 239
– Setting the Outside Humidity
Use the
Increase and Decrease buttons to select the correct humidity, and the press the Enter
button to store it.
6.32.7 Outside Temperature
The Temperature sensor is pre-calibrated before leaving the factory, and should not require
adjustment. However the current temperature may be entered in this screen to re-calibrate the
WSO100 should this be required.