IP66
12
10
8
9
15 Nm
11
13
14
15
15
16
Rev.
01-19/12/2019
90/75
195/165
185/125
235/185
65/50
Indus 34,2W-53,8W
Indus 89,2W
Via S.Croce n°121 z.i.
47032 Berinoro (FC) Italia
Use and maintenance instructions
INDUS with water-tight terminal block
Street lighting luminaire for installation on poles or brackets Ø60mm on top
TECHNICAL DETAILS: please refer to the product label
Insulation Class II
The EU declaration of conformity can be downloaded from our website www.marecoluce.it
Protection degree against dust ingress, solid particles, moisture
This product must not be disposed as a normal household waste
WARNINGS:
•
THE SAFETY OF THIS PRODUCT IS GUARANTEED ONLY WITH THE RESPECT OF THE EXISTING RULES FOR
THE ELECTRICAL SYSTEMS, AND WITH THE APPROPRIATE USE OF THESE
INSTALLATION INSTRUCTIONS, THEREFORE IT IS NECESSARY TO KEEP THEM.
• THE IMPROPER USE OF THIS PRODUCT IS FORBIDDEN; ANY TAMPERING WITH THE PRODUCT OR
MODIFICATION OF THE PRODUCT THAT IS NOT AUTHORIZED BY MARECO LUCE CAN CAUSE DAMAGE TO
PEOPLE, ANIMALS OR THINGS, AND WILL VOID ANY WARRANTY OR LIABILITY.
• SWITCH OFF THE ELECTRICITY BEFORE CONDUCTING ANY KIND OF MAINTENANCE.
• THE PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH BEST PRACTICE.
• THE LIGHTING SOURCE OF THIS LUMINAIRE MUST BE REPLACED BY THE MANUFACTURER ONLY
• DAMAGED COMPONENTS MUST BE REPLACED WITH MARECO LUCE ORIGINAL SPARE PARTS BEFORE
REUSING THE PRODUCT.
GENERAL MAINTENANCE RECOMMENDATIONS:
•
CLEAN THE FITTING PERIODICALLY TO REMOVE POSSIBLE DIRT DEPOSITS ON THE LUMINAIRE.
• DO NOT USE HARSH DETERGENTS TO CLEAN THE DIFFUSER.
• CHECK THE TIGHTNESS OF THE SCREWS SECURING THE LUMINAIRE TO ITS SUPPORT.
• CHECK THE INTEGRITY OF THE COMPONENTS AND REPLACE THEM IN CASE OF ANY DAMAGE
BY USING ORIGINAL MARECO LUCE SPARE PARTS.
The lighting source of this luminaire must be replaced by the manufacturer only
ENEC 05 certified luminaire
The luminaire is suitable for indoor use
The luminaire is suitable for pole mounting at a maximum recommended height of 15 meters
Suitable for mounting
On pole and bracket
Luminaire weight
6,8 Kg
Maximum projected surface area subject to wind pressure
0,186 m²
Dimensions of the compartment housing the connection box
(the box holding the connections)
Pict.A
Torque value (in Nm) to apply in tightening all bolts
and screws securing the luminaire on its support
15 Nm
Power factor
>0,95
The luminaire is suitable for indoor use
The luminaire is suitable for pole mounting at a maximum recommended height of 8 meters
Suitable for mounting
On pole and bracket
Luminaire weight
4,1 Kg
Maximum projected surface area subject to wind pressure
0,112 m²
Dimensions of the compartment housing the connection box
(the box holding the connections)
Pict.A
Torque value (in Nm) to apply in tightening all bolts
and screws securing the luminaire on its support
15 Nm
Power factor
>0,95
SIZE OF THE CONNECTION BOX
Pict.A
