8516 Hybrid NVR with RAID Installation Guide
16
Feature Overview
Front Panel LEDs
The colored LEDs (Light Emitting Diodes) on the front panel of the unit indicate status. Each
tricolor LED is marked to indicate which component the LED displays information about. The color
of the LED and whether the light is on solid, flashing, or off, gives you information about the
recorder.
Unit LED
The status of
the unit.
Green
Solid:
The unit’s software and hardware are operating correctly.
Flashing:
The keyed power switch has been turned off or power has been
removed — the system is waiting for software to complete the shutdown of the
unit.
Blue
Solid:
The operating system is loaded but the unit’s software application is still
loading.
Flashing:
The unit is booting up after the keyed power switch has been turned
on or after a software reboot.
Red
The hardware watchdog timer has expired and reset the system.
Operation LED
The status of
the unit’s
operation.
Green
Solid:
The software in the unit is operating correctly, and the unit is powered
and running.
Flashing:
The operating system is available but the software is still loading.
Blue
A system-level problem (non-critical) has been reported.
Red
A critical error has occurred.
Use the Administrator Console or Command Client software application to
review the health alert and determine a possible resolution.
For more information, see the
Administrator Console User Manual
or
Command Enterprise User Guide
, available from the March Networks Partner
Portal website.
Recording
LED
The status of
the unit’s
recording.
Green
Actively recording as configured (the recorder may be configured to record
continuously or only configured to record when triggered by an alarm or a
schedule).
Red
A system-level problem has occurred which is affecting current recording or
will affect future recording.
Off
The system is starting up or is not currently configured to record.
Front Panel LEDs
