48
Web/Telnet/FTP – Security Settings
To set permission for each user account for Web and Telnet access. It is valid for up to
8 users.
User Name
This sets the username for Web and Telnet access.
Password
：
Sets user’s password for Web and Telnet access.
Permission
：
Sets the type of access allowed (No Access / Read/ Read&Write)
Do not enter a username and password to allow everyone to access the card. But
at least one line (User) must have Read/Write permission, either without a username
and password or with a username and password. One line (User) must have
Read/Write permission.
IP Filter
：
Only allows a specific IP address to log in to the card.
*.*.*.* means any IP address
Auto Logoff after Idle for xx minute (s). ( 0 is disabled)
The user is logged off automatically once the preset time is reached.
SSL Information
The card supports HTTPS protocol and various SSL encryptions for network
connections.
The user may upload its Public Key and Certification for authentication. When both the
public key and certificate are uploaded to the card, the card’s communication is
encrypted by SSL.
(To communicate via HTTPS, enable HTTPS port 443.) To create your own public key
and certification, please refer to OpenSSL