12
Connecting the power cord
After completing all the connections, insert the power plug into the power outlet.
To household power outlet
(AC 120 V, 60 Hz)
Power cord (supplied)
NOTE
•
Do not plug in the power cord until all connections have been completed.
• Do not bundle power cords together with connection cables. Doing so can result in humming or noise.
Remote control connection
When you use this unit connected to a marantz amplifier, this unit receives operation signals sent from the
amplifier and operates accordingly.
Connection
Use the supplied remote control cable to connect the REMOTE CONTROL IN connector of this unit to
REMOTE CONTROL OUT connector of the amplifier.
Setting
Set the remote control switch on the rear panel of this unit to“EXT. (EXTERNAL)” to use this feature.
• This setting will disable remote sensor reception of this unit.
• To operate the unit, point the remote control at the remote sensor of the amplifier.
To use this unit without connecting it to the amplifier, set the remote control switch to “INT. (INTERNAL)”.
Amplifier
Remote control cable
(supplied)
Set to “EXT. (EXTERNAL)”
This unit
Flasher input
This is used when controlling components from different rooms with a keypad or other input device.
Set the remote switch to “INT. (INTERNAL)” when using a flasher input.
Basic v
ersion
A
dv
anced v
ersion
Inf
or
mation
Basic v
ersion
DVD
Содержание UD5007
Страница 81: ...D M Holdings Inc 3520 10150 00AM V00 ...