Press and hold “
PURE DIRECT
" for 3 seconds.
Press and hold “
PURE DIRECT
" for 3 seconds and
“CLEAR” is displayed followed by “NO PROTECT”.
The unit’s Protection History is now cleared.
Clearing the Protection History
If the unit is in “Protection History Display Mode”, just press and hold the
“PURE DIRECT”
button for 3 seconds.
Note:
If you do
not mind erasing your settings from this unit, you can also “Initialized/Micro Reset the unit to clear the Protection History from
the unit’s memory.
If the unit is not in “Protection History Display Mode”,
enter the “Protection History Display Mode”:
1. Press and hold the
“INTERNET RADIO”
and the
“ONE TOUCH PLAY”
buttons at the same time and press the
“POWER”
button
to turn on the power.
2. Press the “
STATUS
” button to turn on the FL display.
FLD
L1
P
R
O
T
E
C
T
L2
H
I
S
T
O
R
Y
L3
:
D
C
Warning Displays by POWER LED
If the power is turned off while a protection is detected, the POWER LED (red) flashes in the following ways as a warning according
to the protection status.
(a) ASO/DC protection: Flashes in 0.5-second cycles (0.25 seconds lit, 0.25 seconds unlit)
(b) THERMAL protection: Flashes in 2-second cycles (1 seconds lit, 1 seconds unlit)
SR6006 - Protection History Display Mode (3 of 3)
21
Front Panel and Button Locations
Protection History Display Mode Procedure
FLD
L3
C
L
E
A
R
FLD
L3
:
N
O
