56
Vol.Limit
This sets the maximum analog audio output level that can be used when
the analog audio output setting is set to variable.
0 dB
: Set the maximum analog audio output level to 0 dB.
–10 dB
(Default) : Set the maximum analog audio output level to –10 dB.
–20 dB
: Set the maximum analog audio output level to –20 dB.
%
•
This can be set when the “Audio Out” (
page 55) setting is set to “Variable”.
Auto Stnby
A standby status is established at the unit if a stopped status or a no
external input signal status continues for 30 minutes or more.
On
: Enable Auto Standby mode.
Off
(Default) : Disable Auto Standby mode.
%
•
When iPod is being charged, this unit enters the power standby mode after
charging.
