1. Selecting the Mode1 for Service-related
1.1. Actions
Selecting Each Mode.
1.2. Starting up
Insert the AC plug while pressing "
POWER
" button, and wait for more than 3 seconds.
Select the desired mode using the "
CURSOR
f
/
d
" button, then press the "
ENTER
" button to confirm.
1.3. Displaying and Selecting Each Mode
The information shown on the display switches each time the "
CURSOR
f
/
d
" button is pressed.
Press the "
ENTER
" button to set the currently displayed mode and restart the device.
q
Version Display Mode
The firmware version is shown on the display.
w
IR Control Test
Used to check IR control operations.
e
Protection history display mode
The protection history can be checked.
r
All Device DPMS Update
Executes an update for the entire device via DPMS.
t
Display Check mode
Check the display.
y
Initialize
Initialize the backup data for the MCU and network module.
3-4. Canceling the selected mode
Unplug the AC plug to cancel this mode.
Before Servicing
This Unit
Electrical
Mechanical
Repair Information
Updating
48
