Marantz PM6007, Руководство пользователя

Страница: 41 / 49

No sound comes out
No sound comes out of speakers.
0
Check the connections for all devices. (
v
p. 15)
0
Insert connection cables all the way in.
0
Check that input connectors and output connectors are not reversely connected.
0
Check cables for damage.
0
Check that speaker cables are properly connected. Check that cable core wires come in contact with the metal part on speaker terminals. (
v
p. 16)
0
Securely tighten the speaker terminals. Check speaker terminals for looseness. ( v p. 16)
0
Check that the proper input source is selected. (
v
p. 27)
0
The volume is set to the minimum level. Adjust the volume to a suitable level. (
v
p. 27)
0
Cancel the muting mode. (
v
p. 27)
0
Check the settings of the SPEAKERS A/B buttons. (
v
p. 27)
The COAXIAL, OPTICAL 1 or OPTICAL 2 input indicator is flashing.
0
Check the connection of the Coaxial digital cable or Optical cable. (
v
p. 22)
0
Set the Digital Audio output signal of the connected device to 2 channel linear PCM. (
v
p. 43)
Desired sound does not come out
No sound comes out of a specific speaker.
0
Check that speaker cables are properly connected. (
v
p. 16)
0
Adjust the BALANCE control knob. (
v
p. 28)
The left and right of stereo sound is reversed.
0
Check whether the left and right speakers are connected to the correct speaker terminals. (
v
p. 17)
Contents Connections Playback Settings Tips Appendix
41
Front panel Rear panel
Remote control
unit
Index