Switching the function of the volume buttons on the remote control
When the function of the VOLUME
df
buttons on the remote control is set
to “Variable”, the analog audio output level can be adjusted.
Be sure to check the operation of each unit after setting the remote control
codes.
AMP
(Default)
:
Adjusts the volume of Marantz amplifiers.
Variable:
Adjusts the analog audio output level of the
analog audio signal output from this unit.
Set the function of the volume buttons
on the remote control to “Variable”
1
Press and hold the ENTER and number 1 button down
together for more than 5 seconds.
NOTE
To adjust the analog audio signal output from this unit using the remote control, also
set “Audio Out” to “Variable”. (
v
p. 90)
Set the function of the volume buttons
on the remote control to “AMP”
1
Press and hold the ENTER and number 2 button down
together for more than 5 seconds.
NOTE
The remote control codes returns to the default settings when the batteries are
removed. Set the remote control codes again after replacing the batteries.
Contents
Connections
Playback
Settings
Tips
Appendix
97
Front panel
Rear panel
Remote control
unit
Index
Содержание NA8005
Страница 130: ... D M Holdings Inc 3520 10293 00AM 130 ...
Страница 131: ...Network Audio Player NA8005 Quick Start Guide Guide de démarrage rapide Guía de inicio rápido ENGLISH FRANÇAIS ESPAÑOL ...
Страница 135: ...4 1 Before using the remote control unit R03 AAA batteries ...
Страница 145: ... antz A8005 Cot l n S C 9ht 2014 D M Ho u ...