Marantz M-CR611, Руководство пользователя, Страница: 92 / 162

o
Selecting speakers to output audio
You can set up this unit to output audio from Speaker A, Speaker B, or
both.
1
Press SPEAKER A/B.
The current setting is displayed.
2
Press SPEAKER A/B again to change the settings.
Speaker A = On :
Outputs audio from Speaker A only.
Speaker B = On :
Outputs audio from Speaker B only.
Both Speakers A and B = On :
Outputs audio from both Speaker A and Speaker B.
0
When using this connection, also set “Bi-Amp” in the menu to “Disable”.
(
v
p. 101)
0
When “Both Speakers A and B = On” is set for the output audio speakers and
AirPlay or Remote Play is used on an external devices or a Bluetooth operation is
performed on an iOS device, the volume display on the external device or iOS
device follows the volume of Speaker A.
o
Specifying speakers to adjust the volume
When 2 sets of speakers (Speaker A/Speaker B) are connected, either
Speaker A or Speaker B can be selected for volume adjustment.
1
Press VOLUME A/B.
The speakers whose volume is to be adjusted are shown in the unit
display.
2
Press VOLUME
df
to adjust the volume.
NOTE
0
This is only enabled when “Both Speakers A and B = On” is set for the audio
output speakers.
Contents Connections Playback Settings Tips Appendix
92 Front/Top
panel
Rear panel
Remote control
unit
Index