3. CD MECHA ASSY
Proceeding : PANEL SIDE
→
TOP COVER
→
FRONT PANEL ASSY
→
CD MECHA ASSY
(1) Remove the screws. Remove the connector wire and FFC.
(2) Remove the FFC cable after the CD mecha's short circuit pattern for LD damage prevention has been short circuited.
Be sure to wear an earth band.
4. MECHA SUPPORT L/R
Proceeding : PANEL SIDE
→
TOP PANEL
→
FRONT PANEL ASSY
→
CD MECHA ASSY
→
MECHA SUPPORT L/R
See "EXPLODED VIEW" for instructions on removing the MECHA SUPPORT L/R.
5. TUNER
Proceeding : PANEL SIDE
→
TOP PANEL
→
TUNER
See "EXPLODED VIEW" for instructions on removing the TUNER.
x4
x3
CN703
FFC
FFC
Soldering place
16