Marantz CD6006 Скачать руководство пользователя страница 51

Страница: 51 / 64

3. Updating via USB-A (IC107)

The latest firmware can be downloaded to a USB memory for updates.

3.1. Connecting to the USB Memory

(1) Preparation

• Use a memory that supports USB2.0.

• USB format : Prepare a USB memory formatted in FAT16 or FAT32.

• Do not run the USB memory through a hub.

• Do not connect a computer to the USB port of this unit using a USB cable.

• Do not use an extension cable when connecting the USB unit.

• If a USB memory device cannot be updated, replace it with a different USB memory device and per-

form the update again.

3.2. Unzipping the Downloaded File

Unzip the downloaded file on your computer.

CD6006

USB_CD6006_XXXX.zip

The "

DCD1650U.BIN

" file is created upon unzipping the file.

Copy that file to USB flash drive.

The "

DCD1650U.BIN

" file must be in the root directly of the USB flash drive (memory).

copy to USB flash drive

3.3. Insert the USB memory into the USB port.

Download ﬁrmware

in USB ﬂash drive.

Caution in

servicing

Electrical

Mechanical

Repair Information

Updating

Содержание CD6006
































































Результаты поиска

Содержание CD6006

Отзывы:

Похожие инструкции для CD6006

Бренды по названию

Популярные бренды

Marantz CD6006, Руководство по обслуживанию

Результаты поиска

Содержание CD6006

Отзывы:

Похожие инструкции для CD6006

Бренды по названию

Популярные бренды