www.rossomaranello.com
21
2. Charging
This unit is shipped from the factory with its internal battery fully
charged, however, some charge may be lost during shipping and the
battery should be recharged prior to use. Plug the unit into an
appropriate power supply and allow the UPS to charge fully by leaving
it plugged in for 6 hours with no load (no electrical devices such as
computers, monitors, etc.) connected.
3. Placement
Install the unit in any protected environment that provides adequate
airflow around the unit, and is free from excessive dust, corrosive
fumes and conductive contaminants. Do not operate your UPS in an
environment where the ambient temperature or humidity is high.
Place the UPS unit away from monitor at least 20cm to avoid
interference.
