Stamp:
Video recording/pictures whether add into the time and date, customer logo and
speed info.
Date
：
Use up or down key to change the digits and press OK to go to next item.
Auto LCD off Time
: set the time auto turn off the LCD screen; press any key to wake up
the LCD screen.
Reset system
: to set the system parameter as the default value.
Light source frequency
: to choose the frequency of electric wire, in the event of selecting
the wrong frequency, the horizontal lines interruption will show on the image.
G-sensor:
G-Sensor is used to test if the car has any crash. If so, it will automatically lock
the file, there will be a
at the right corner of file. In this case, the video won’t be
erased by loop recording. There are eight settings of these sensitivity of the G-sensor:
off/1/2/3/4/5/6/7. “Off” closes the G-sensor function. “1” is the lowest sensitivity and “7” is
the highest. (To prevent too many locked files in the card which may affect normal loop
recording, the max total size of the locked file is 1GB)
Manual Lock and unlock the file:
During recording, press “mode” to lock the file, press “mode” again to unlock the file. Durin
g thumbnail status, short press “power” to lock and unlock the file.
Version
: to check the version number of video recorder.
Remarks
：
(1) Photo resolution default 5M
(2) In connection with car charger, the car is turned off, make video delay 30 seconds before
shutdown.
(3)When power on, GPS auto search satellite. No GPS positioning, LCD screen display dyn
amic lower left corner of the yellow icon ; GPS positioning, LCD screen shows a
green icon on the lower left corner. (Optional).
Operation
Operation
