Maple Systems Silver HMI504T, Инструкция по установке и эксплуатации

Страница: 45 / 272

4
To open an existing project
1. On the File Menu, click Open or click the Open icon in the Standard toolbar. The Open
dialog box appears.
2. Click on the project file you intend to open.
3. Click Open . The main screen of EasyBuilder appears with the initial screen of the project
displayed.
4
To close a project
1. On the
File
Menu, click
Close
. If changes have been made to the project file, EasyBuilder
will ask you if you would like to save the project. Then the main screen of EasyBuilder will
remain but with no work area displayed. You must now use the Open or New commands to
edit a project.
4
To save an existing project
1. On the File Menu, click Save or click the Save icon in the Standard toolbar.
2. If the project already has a name, then the project will automatically be saved. If this is a new
project, then the
Save As dialog box appears.
3. Enter a file name and then click
Save
.
4. The main screen of EasyBuilder reappears.
4
To save a project using the compress feature
The compress feature allows you to save a project in compressed format so that the project data takes less space on
your hard drive. This utility also will save the graphics libraries associated with the project into the project file.
This facilitates sending a copy of the project to another person who has EZware in order to download the project
into an OIT.
1. From the
Tools
menu, select
Compress/Uncompress...
. The Compressing dialog box
appears.
2. In the Compress frame box under Source Name , select the project (*.epj) file that you wish
to compress. File must have a .cmp extension.
3. Click Compressing… to begin. The utility will compress the project file and all related
graphics libraries into a single file.
4
To extract a compressed project file
1. From the
Tools
menu, select
Compress/Uncompress...
. The Compressing dialog box
appears.
2. In the Uncompress frame box under Source Name , select the project (*.cmp) file that you
wish to uncompress.
3. Click Uncompressing… to begin. The utility will extract the project file and all graphics
libraries from the *.cmp file.
4
To exit EasyBuilder
On the File Menu, click Exit or click on the standard windows Close icon in the upper right corner.
Print ing Pro jects
A text-based project summary can be printed from within EasyBuilder. Printing from the Project Simulator allows
more options, including generic pictures of the screens. To print the summary, select
Print Object Summary from
the File menu. Other options include Print Preview and Print Setup .
4
Printing project data is done from the Project Simulator
1. Start the project in the On- or Off-line simulator.
2. Display the window to be printed.
3. Right-click anywhere in the window.
4. To print or save a copy of the window, select Print Screen or Print Screen to File. To print
object/address information for the screen, select Print Window or Print Window to File. A list
of active windows is displayed. Select the desired window. Select Image to display an image
of the window, or Table to display object/address information.
1010-1001a, Rev 02
Using EZware-500 41