Maple Systems Silver HMI504T, Инструкция по установке и эксплуатации

Страница: 29 / 272

19. On the main screen of EasyBuilder, you should see the increment key that you just created
move and/or change size. The increment key is now complete.
4
To create a decrement key on Window#11
1. As with the second function key of Window #10, we are going to create the decrement key by
copying the increment key and then making changes to the attributes.
2. Click the increment key to highlight it.
3. From the Edit menu, click Copy .
4. From the Edit menu, click Paste . A copy of the increment key appears in the upper left
corner of the work area. Deselect the increment key by clicking on any blank space in the
work area.
5. Double-click on the second increment key. The Set Word Object’s Attribute dialog box
appears.
6. In the General tab section, change the Description to Decrement Button .
7. Click on the pull down box of the Set Style Attribute and select
JOG—
.
8. Enter 0 in the Attribute Bottom limit box.
9. Click the
Shape
tab.
10. Click Shape library . The Shape Library dialog box appears.
11. Scroll through the selections to selection 22. Click the shape, then click
OK
. The shape
should appear in the Shape tab.
12. Click on the Profile tab.
13. Enter 105 for the X position. Enter 74 for the Y position.
14. Click OK .
15. On the main screen of EasyBuilder, you should see the decrement key that you just created
move to the lower right hand side of the work area.
The following illustration shows how the popup window looks:
1010-1001a, Rev 02
Cre ating Your First Project 25