Manupro MPSCST255MM2, Инструкция пользователя

Страница: 43 / 48

GB | 43
17. Troubleshooting
Fault Possible cause Remedy
Blade dissolves after
switching off the en -
gine
To slightly tightened fastening nut Tighten the right hand thread nut
Engine will not start Failure mains fuse Check mains fuse
Defective extension cable Replace extension cord
Connections on motor or switch not in
order
Repair by electrical specialist
Motor or switch faulty Repair by electrical specialist
Motor will not work,
the fuse is active
Cross section of the extension cable does
not sufficienty
see „Electrical connection“
Overload by a blunt saw blade Change saw blade
Fire marks on the
cutting surface
Blunt saw blade
Sharpen saw blade (only by an authorised
sharpening service) or replace
Wrong saw blade
Change saw blade
EXCLUSIONS OF GUARANTEE:
The guarantee does not cover the normal wear of the product, nor problems or damages resulting from:
（
1
）
superficial deteriorations due to the normal wear of the product;
（
2
）
defects or deteriorations due to contact with food or liquids or corrosion generated by rust;
（
3
）
any incident, abuse, misuse, modification, disassembly or unauthorized repairs;
（
4
）
any incorrect maintenance operations, improper use and connection to an incorrect power supply;
（
5
）
any use of unofficial or unapproved accessories.
If the product rating label and / or serial number is deleted, the warranty will be cancelled.
Guarantee 18.