Mantracourt Electronics Limited
PSDS User Manual
36
Clone Export File
To successfully import a Clone Export file, either the calibration and configuration sections must be unprotected
in the connected device or the passwords encrypted in the data file must match those in the protected sections of
the connected device.
After selecting the file the toolkit will inform you whether the data can be imported and if it can you can chose to
click the Import button to perform the cloning action.
When cloning a handheld, all configuration, user calibration and user settings are duplicated leaving only the
original factory settings and factory calibration intact
NOTE: If the Clone Export file contains encrypted passwords to protect either the calibration or
configuration sections then it must be understood that those sections will become locked in the
connected device once the data file is imported. There is no way to unlock a protected section if
the password is unknown (Resetting of a forgotten password will require proof of right to
access and may require a return to supplier and incur additional cost.) so be sure that the
source of the Clone data file is trusted or that you know the passwords yourself. (It is normal for
a provider of a locked down device to provide a Clone data file that can update that device.)
Item
Description
Select File
button
Click to open a file select dialog box
to allow you to choose the location of the file to import.
Import
button
Perform the import.