DON’T FUEL, REFUEL, OR
CHECK FUEL WHILE
SMOKING, OR NEAR AN
OPEN FLAME OR OTHER
IGNITION SOURCE.
INCORRECT ASSEMBLY.
CAUTION: WHEN
ASSEMBLING THE HANDLES,
MAKE SURE FUEL TANK FACES
AWAY FROM OPERATOR. THIS
IS THE REAR OF THE TILLER,
REFER TO ASSEMBLY
INSTRUCTION ON PAGE 7.
CUTTING HAZARD; KEEP
FEET AND HANDS AWAY
FROM ROTATING TINES.
WEAR EAR AND EYE
PROTECTION.
READ OWNER’S MANUAL
BEFORE USING TILLER, OR
PERFORMING ANY REPAIR
OR MAINTENANCE. KEEP
OWNERS MANUAL IN A
SAFE PLACE.
DO NOT CARRY THE TILLER
IN THIS POSITION.
WARNING • DANGER
IF THE TILLER IS USED IMPROPERLY OR SAFETY PRECAUTIONS ARE NOT FOLLOWED,
THE USERS RISK SERIOUS INJURY TO THEMSELVES AND OTHERS.
READ AND UNDERSTAND THIS MANUAL BEFORE ATTEMPTING TO OPERATE THIS TILLER.
!
!
An important part of the safety system incorporated in this tiller are the
warning and information decals found on various parts of the tiller. These
decals must be replaced in time due to abrasion, etc. It is your responsibility to
replace these decals when they become hard to read. The location and part
numbers (P/N) of these decals are illustrated below.
III. Safety Decal Information
4
IV. Warnings - Do’s
Read and understand the owner’s
manual. Pay particular attention to all
sections regarding safety.
1. Always
keep a firm grip on both
handles while the tines are moving and/or
the engine is running. BE AWARE!! The
tines may coast after throttle trigger is
released. Make sure tines have come to a
complete stop and engine is off before
letting go of the tiller.
2. Always
maintain a firm footing and
good balance. Do not overreach while
operating the tiller. Before you start to use
the tiller, check the work area for obstacles
that might cause you to lose your footing,
balance or control of the machine.
3. Thoroughly
inspect the area where
equipment is to be used and remove all
objects, which can be thrown by the
machine.
4. Always
keep area clear of children,
pets, and bystanders.
5. Always
stay alert. Watch what you
are doing and use common sense. Do not
operate unit when fatigued.
6. Always
dress properly. Do not wear
loose clothing or jewelry, they might get
caught in moving parts. Use sturdy gloves.
Gloves reduce the transmission of
vibration to your hands. Prolonged
exposure to vibration can cause numbness
and other ailments.
7. While working
, always wear
substantial footwear and long trousers. Do
not operate the equipment when barefoot
or wearing open sandals.
8. Always
wear ear and eye protection.
Eye protection must meet ANSI Z 87.1.
To avoid hearing damage, we recommend
hearing protection be worn whenever
using the equipment.
9. To reduce fire hazard,
keep the
engine, and petrol/gas storage area free of
vegetative material and excessive grease.
10. Start
the engine carefully,
according to the manufacturer’s
instructions and with feet well away from
tool(s).
11. Keep
all nuts, bolts and screws
tight to be sure the equipment is in safe
working condition.
12. Use extreme
caution when
reversing or pulling the machine towards
you.
13. Work only
in daylight or good
artificial light.
14. Always
be sure of your footing on
slopes.
15. Exercise
extreme caution when
changing direction on slopes.
16. Always
keep a safe distance
between two or more people when
working together.
17. Always
inspect your unit before
each use and ensure that all handles,
guards and fasteners are secure, operating,
and in place.
18. Always
maintain and examine your
Tiller with care. Follow maintenance
instructions given in manual.
19. Always
store tiller in a sheltered
area (a dry place), not accessible to
children. The tiller as well as fuel should
not be stored in a house
.
DON’T OPERATE
INDOORS
P/N 400630
P/N 430057
WARNING • DANGER
OPERATION OF THIS EQUIPMENT MAY CREATE
SPARKS THAT CAN START FIRES AROUND DRY
VEGETATION. A SPARK ARRESTOR IS INSTALLED.
THE OPERATOR SHOULD CONTACT LOCAL FIRE
AGENCIES FOR LAWS OR REGULATIONS RELATING
TO FIRE PREVENTION REQUIREMENTS.
!
!
401777 Deluxe 4C Tiller-Cultivator_400752.Tiller/Cultivator 8/12/11 10:52 AM Page 4
