Mantis 8550-01-38, Руководство оператора, Страница: 6 / 30

GB | Operating Instruction
5 Battery Powered Grass - and Shrub Shear- Operator’s Manual
Battery Hedge-Trimmer
1. Introduction to the Operating Instructions
These Operating Instructions are intended to facilitate your becoming acquainted with the machine and using it in accord-
ance with the regulations. The Operating Instructions contain important information on how to use the machine safely,
correctly and economically. Observing this information will help increase the reliability and working life of the machine. The
Operating Instructions must always be at hand when the machine is being used.
They must be read and observed by every person dealing with the machine, whether operating, servicing or transporting it.
In addition to the Operating Instructions and the applicable rules of the prevention of accidents valid in the country of use
and on site, the generally recognised rules on working safely and correctly must be observed as well as the accident preven-
tion rules of the relevant professional associations.
1 Wear eye and ear protection!
2 Warning!
3 Read the instruction manual!
4 Do not use the tool under wet weather conditions!
5 Caution! Risk of injury, sharp blade!
6 Attention: Environmental Protection! This device may not be disposed of with general/household waste.
Disposeof only at a designated collection point.
1 2 3 4 5 6
3. Pictogram illustration and explanation
2. Technical Specifications
Model 8550-01-38 UK
8550-01-40 Europe with Eco-Switch
Operational voltage 24 V DC
Blade length 550 mm
Cutting Thickness 20 mm
Cutting length 506 mm
Cutting movements
Low =
2.200 min -1
High =
3.000 min -1
Battery type Li-Ion-24 V / 1,4 Ah
Idle-run time with a fully recharged battery Low = approx 60 minutes High = approx 30 minutes
Weight
3,05 kg
Level of noise pressure L
pA
*
82 dB(A)
K 3,0 dB
Vibration on the handle* <2,5 m/s
2
K 1,5 m/s
²
Battery charger
Mains voltage 230 V ~ / 50 Hz
Charging voltage 25,2 V DC
Charging current 500 mA
Charging time approx 3,5 hours
* according to EN 60745-2-15
Technical changes are reserved.