Mantis Vision F5-B, Руководство пользователя

Страница: 54 / 126

F5 3D Imaging System User Manual
54
If the Automatic Stitching process has achieved a single Segment and the
displayed 3D point cloud model looks complete and correct, then you may not
need to do any stitching.
However, if stitching is needed, the Stitching window provides a rich variety of
options, such as Segment Registration, which is the process of manipulating the
position of two point cloud Segments into alignment for registration.
Opening the Stitching Window
►
Use one of the following options to open the Stitching
window:

Right-click a 3D video that has already been decoded, meaning an MPC file or
a saved stitch file in the File Explorer (as described on page 42) and select the
Open T4 option. You must specify the path of the T4 the first time you use this
option.

Select an MPC file in the File Explorer and click the T4 tool in the toolbar at the
bottom of the File Explorer, as shown below:
Figure 29: Launching Stitching Window from File Toolbar

To stitch together a composition of multiple MPC files into a single point
model, use the Ctrl key to select multiple files in the File Explorer and then
select the T4 tool in the toolbar at the bottom of the File Explorer.