The installation of this product must comply with all local regulations, including those
referring to national and European Standards. We are not responsible for any fault arising
through incorrect assembly or installation.
SAFETY
Transport / Moving / Lifting
Necessary facilities must be available for loading, unloading and site handling.
Fire Cement
Some types of fire cement are caustic and should not touch your skin. In case of contact,
wash immediately with plenty of water.
Metal Parts
Be careful of personal injury when installing or maintaining this appliance.
Other possible injuries
The stove contains no harmful materials, but if there is a possibility of using any
dangerous materials in the course of installation then please seek specialist guidance and
use appropriate protective equipment where required.
Important Warning!
This appliance must not be installed into a chimney shared with any other heating
appliance.
There must not be an extractor fan fitted in the same room as the stove as this can cause
the stove to emit fumes into the room.
INSTALLATION
Chimney
The chimney must be fitted
in accordance with manufacturer’s instructions and Building
Regulations.
The chimney height and the position of the chimney should conform to Building
Regulations and all local regulations, including those referring to national and European
Standards.
The chimney must be in good condition, and any cracks and obstructions are not
permitted. The diameter of the flue should not be less than 125mm and not more than
200mm. If any of these requirements are not met, the chimney should be lined by a
suitable method. The chimney must be swept before connection to the stove. We also
recommend that the chimney be swept a second time within a month of regular use after
installation. Please consult your local installer / retailer, if you have any doubts about your
chimney installation.
Flue Draught
