Mannesmann 12982, Инструкция по эксплуатации

Страница: 4 / 4

GB - 6
Switch off
•
Release the trigger and secure with the safety-
lock.
•
When unit is not in use for longer period (> 5
min.) press "O" (=OFF) of the main-switch.
Jet Fan nozzle
By turning the nozzle-sleeve you may adjust from
spot-jet to a fan-jet.
Foam nozzle
•
Before mounting the foam nozzle, the cleaner
has to be disconnected from the power-supply.
•
Remove the spray-lance from the spray-gun.
•
Screw the foam-nozzle into the spray-gun.
Please observe the detergent-bottle must be
positioned downwards.
•
Screw-off the detergent-bottle and fill up with
detergent observing the maker´s instructions.
•
Screw the bottle to the foam-nozzle and pull the
trigger of the spray-gun.
•
Spray detergent onto the dry surface and let it
react, but not dry-out, for some minutes.
•
Remove the foam-nozzle from the spray-gun,
fasten the spray-lance, as discribed above and
clean the object with the jet-stream.
Finishing operation
•
Press "O" (=OFF) of the main-switch and remove
the plug from the power outlet.
•
Close the water tap and disconnect the unit from
the water-supply.
•
Pull the trigger for pressure-balance, until there is
no more water in the unit.
•
Secure the trigger with the safety-lock.
•
Store the unit at a safe, dry and frost-free room
and keep out of the reach of children.
Cleaning and maintenance
•
Before doing any cleaning-jobs or maintenance
be sure the unit is disconnected from the power-
supply.
•
Clean the housing of the high pressure cleaner
by using a dry cloth without using any detergents,
which might damage the plastic-housing.
•
Remove the filter out of the water-connection and
clean under running water.
•
Place the protection-caps on the water-connector
and the high pressure outlet, in order to protect
them against damage during transport or storing.
•
The attached needle is meant for cleaning of the
nozzle. Stick the needle after each use through
the nozzle, in order to remove any objects or
deposits.
2 years warranty
The warranty for this tool starts at the date of
purchase. Please provide your purchase bill as proof.
This warranty includes:
•
repair of operational failures
•
replacement of faulty parts
•
qualified service and installation
provided that the failure does not result of wrong
handling.
Please do not hesitate to contact us for any further
queries:
Brüder Mannesmann Werkzeuge GmbH
Abt. Reparatur - Service
Lempstrasse 24
D-42859 Remscheid
phone: +49 2191 / 37 14 71
fax:
+49 2191 / 38 64 77
Old Power Tools and Protection of the Environ-
ment
•
If your tool has been so heavily used that it has
become worn out and has to be replaced, or you
have no further use for it, you must turn the
electrical tool in at a central recycling centre for
disposal.
•
Please contact your community waste collection
service or local authority to find out where you
can hand in your tool for recycling.
•
Electric tools contain valuable raw materials that
can be recycled. You will contribute to recycling
valuable raw materials by handing your tool in at
a central waste disposal centre.
•
Electric tools also contain substances that may
be harmful to the environment and humans if
disposed of inappropriately.
•
The no-go sign with the dustbin means that you
have a duty to take that article with the sign to be
recycled by a separate waste collection facility for
electrical and electronic equipment.