Step One:
Take 1 side and 1 end and put the
fingers together. Make sure your
hand holds are facing up and facing
out.
Slide fingers together
Hand holds facing
up and out
→
→
→
Step Two:
Put a construction square onto each inside
corner of the box. Put nails into the pre-drilled
area on fingers before nailing the final side/
end. A box that is not square will not sit proper-
ly on the hive. Once square, pound in your nail.
2 En
ds
Nails
What you will need for Assembly:
•
2 Ends
•
2 Sides
• Hammer
• Nails (sold separately)
• Construction Square
2 Sides
Hammer
Assembling Your Langstroth Hive Body & Super
Place nails into pre-drill area on
fingers and hammer in.
→
→
Rev: 1/14/16 MLL 01-INS
501 1st St S, Hackensack, MN 56452
500 Santa Anita Dr., Woodland, CA 95776
485 Stewart Rd, Wilkes-Barre, PA 18706
1600 Commerce Street, Marshall, TX 75672
Telephone: 800-880-7694
www.mannlakeltd.com
