Manitowoc GROVE GMK5150L, Руководство по эксплуатации

Страница: 814 / 1040

Rigging work
12.8 Outrigger operation
12 - 66 3 302 709 en Operating manual
GMK5150L
1
2
.0
1.
201
8
12.8.11
Operating the axle raising system
The axle raising system has two functions.
– Lifting/lowering wheels
When the truck crane is supported on outriggers, you can raise the wheels
(e.g. levelling horizontally) or lower the wheels (e.g. for driving with a
rigged mobile crane).
– Aligning the truck crane
When driving with a rigged truck crane, you can level the free-standing
truck crane – with a locked suspension, without first supporting the truck
crane on outriggers.
Menu, open
The Raise axle menu can only be opened when
the suspension is switched off (locked);
à
Switching the suspension on/off
, p. 5 - 16.
•
Press button ( 2 ) repeatedly until the
Raise Axle
menu ( 1 ) is displayed.
The assignment to the carrier corresponds to
the top view.
The operation is same on both sides.
Only certain wheel groups can be selected;
à
Selectable wheel groups , p. 9 - 106.
•
Use the buttons ( 3 ) to select the required
wheels – selected wheels ( 2 ) are shown in
black.
Movements are only enabled when the wheel
load per wheel is a maximum of 16 t (35 klbs) –
e.g. 48 t (105 klbs) on the display (
1 ) with a
pre-selected wheel group ( 2 ).