manualshive.com logo in svg

Manitowoc GROVE GMK, Руководство по безопасности

Поделиться
Скачать
Manitowoc GROVE GMK Скачать руководство пользователя страница 71

4 Information on crane operation

4.5 Transporting persons

Safety manual

3 303 022 en

65

0

4.1

1.

202

0

 

 4.5         

Transporting persons

The truck crane is intended for lifting loads. Transporting persons is considered 
improper use of the truck crane. 

It is prohibited to:

– Transport persons in any way with the lifting tackle or on the load. 

– Transport persons outside the driver's cab or in the crane cab.

– Transport persons on the lattice extensions or boom extensions.

– Use the truck crane for any kind of sport or recreation event, especially for 

"bungee" jumping.

– Directly attach equipment for lifting persons to a luffing jib.

– Transport persons with the truck crane when another, less dangerous method 

of transporting persons is possible.

In addition to the provisions of in this section, always also observe the legal 
requirements and guidelines for transporting persons applicable in the country in 
which you are working.

Further information on transporting persons can be found at
the address: 

http://fem-eur.com. 

You can also scan the following QR code.

In the 

Product groups

 category under 

Cranes and lifting equipment

 select the 

Truck cranes

 area. You will find documents there on transporting persons in the 

section: 

Statements and publications

.

Equipment for lifting persons

When lifting persons, only use equipment for lifting persons that comply with the 
requirements specified in the standards and regulations applicable in the country 
in which you are working.

The equipment for lifting persons must be fastened and secured as prescribed.

s

Содержание GROVE GMK

































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды