Manitowoc Grove GMK 4100L-1, Руководство по обслуживанию

Страница: 152 / 356

Maintenance work on the carrier
7.9 Axle lines
7 - 64 3 302 364 en Maintenance manual
GMK 4100L-1
2
5
.1
1.
201
6
7.9.6
Lubricating the Cardan shafts in the axle lines
H
Check all Cardan shafts to see if they have grease nipples.
Cardan shafts with grease nipples must be serviced, Cardan shafts
without grease nipples are maintenance-free.
Grease, spare
parts, tools
– Grease gun from the tool set.
Prerequisites – The truck crane must be raised on outriggers or parked over an inspection
pit.
– The engine must be switched off and secured against unauthorised use;
à
p. 2 - 3.
– The wheels must be turned as far as they will go, so that the lubricating
nipples on the sides of the final drives are more easily accessible.
Lubricating
Cardan shafts ( 2 ) are fitted only to the 8 x 8 x 8
drive.
•
Check which Cardan shafts ( 1 ) and ( 2 ) have
lubricating nipples ( 3 ).
•
Clean the grease nipples ( 3 ).
•
Inject grease into the grease nipples until
grease escapes from the bearing points.
Do not inject grease with excessive force,
otherwise the lip seals may be damaged.
•
Remove the excess grease.
M 1
Lubricating
grease
Designation
to DIN 51502
Specification
classification
GROVE part no.
Grease KP - 1K - 50 DIN 51825 03233369