Manitowoc 140.5.204 Скачать руководство пользователя страница 521

Страница: 521 / 669

Switch cooling mode on or off with the

[air conditioning on/off]

button.

In recirculating air mode, the air inside the cab is recirculated and

only little fresh air is drawn in from outside. As a result, the air

inside the cab is heated up faster and a higher end temperature is

reached.

Do not switch on the "Recirculating air mode" for more than

15 minutes. Extended recirculation mode significantly impairs the

air quality inside the cab. Ensure sufficient fresh air supply.

Prerequisites: The air conditioning system is switched on. The tem-

perature settings have been selected.

Push the

[Recirculating air mode]

button to switch on recircu-

lating air mode.

Switch on the blower with the

[Blower speed]

selector switch.

Set the air distribution of the blower via the

[air diffuser selector switch]

Push the

[Recirculating air mode]

button once more to switch

off recirculating air mode.

The air conditioning system will run in ambient air mode

with the selected temperature settings.

Press the

[Ambient temperature display]

switch for more than

5 seconds.

The temperature display switches from °C to °F.

Press the

[Ambient temperature display]

switch for more than

5 seconds again.

The temperature display switches from °F to °C.

7.19.2

Setting the auxiliary heating system (option)

The machine can be equipped with an engine-independent water

heater for engine-heating and cab-pre-heating, as well as with a

hydraulic tank and battery heater.

The electric water heater is pre-set in the factory and is regulated

via the air conditioning automation.

Operation of the water heating device can decrease the battery

capacity.

Switching recirculating air mode on

and off

Changing the unit in the tempera-

ture display

Operation

27.04.2020

140.5.204 Telescopic crane

521

Reference

Only

Содержание 140.5.204






























































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 140.5.204

Отзывы:

Бренды по названию

Популярные бренды

Manitowoc 140.5.204, Руководство по эксплуатации

Результаты поиска

Содержание 140.5.204

Отзывы:

Бренды по названию

Популярные бренды