Manitowoc 140.5.204 Скачать руководство пользователя страница 485

Страница: 485 / 669

7.15.3

Retracting/extending the boom in emergency operation

In exceptional cases or emergency situations (e.g., SENCON

deadlock), the machine operator must retract or extend the boom

in manual telescoping mode. The sensors must be in working

order.

There is a risk of damage to machinery if the boom is moved

in manual telescoping mode
–

Change to semiautomatic telescoping mode (standard

operation) immediately after eliminating the fault.

–

Use the manual telescoping mode only for retracting the

boom if possible.

–

The following are not permissible in manual mode:
–

Load lifting

–

Working with a load

–

Random extension and retraction of the boom.

Moving the boom in manual telescoping mode can cause

damage to machinery.

Yellow bar

Black bar

Semi-automatic telescoping mode (standard

mode) is selected.

The locking and unlocking processes are initi-

ated automatically. Stopping at an intermediate

position is possible.

Manual telescoping mode (emergency opera-

tion) is selected.

The locking and unlocking processes are initi-

ated manually.

Requirement:

The machine and the SENCON are ready for operation.

The valid operation parameters for the current setup status are

set.

The boom angle is > 60°.

Open the

“Pin boom”

menu page on the SENCON.

Press the

[Telescoping mode]

quick-select button.

A popup menu page opens on the display.

The machine operator is prompted to read the operating

manual and familiarize themselves with the functions of

manual telescoping mode.

NOTICE

Telescoping mode

Selecting manual telescoping mode

Operation

27.04.2020

140.5.204 Telescopic crane

485

Reference

Only

Содержание 140.5.204






























































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 140.5.204

Отзывы:

Бренды по названию

Популярные бренды

Manitowoc 140.5.204, Руководство по эксплуатации

Результаты поиска

Содержание 140.5.204

Отзывы:

Бренды по названию

Популярные бренды