Manitowoc 140.5.204 Скачать руководство пользователя страница 441

Страница: 441 / 669

Risk of accidents from outrigger cylinders moving incorrectly

on the stroke mechanism
–

Observe the uppercarriage position of the machine.

–

Take note of the colored marking on the outrigger cylin-

ders and the remote radio control.

When using the Setup remote radio control, the wrong out-

rigger cylinders may move.

Using the remote radio control (option), the machine operator can

also perform the major drive and work functions from outside the

cab.

The major machine data, operating parameters, notification and

warning messages are shown on the remote radio control display.

All other chapters in this manual describe the execution of drive

and work functions using the controls in the cab.

7.9.1 Switching on remote radio control (option)

Requirement:

The ignition key is in position

[I]

Press the

[Manual/remote radio control]

switch to the right.

The machine switches from manual to remote radio con-

trol.

The engine is switched off.

Exit the cab.

Turn the rotary switch

[Switch remote radio control on/off]

the remote radio control to position

[I]

Press the

[Horn/release remote radio control]

push button on

the remote radio control.

The remote radio control is ready for use.

The engine can be started via the remote radio control.

Switch position left

Switch position right

Manual control is activated.

The crane movements are performed

using the controls inside the cab

Remote radio control is activated.

The crane movements are performed

using the remote radio control.

WARNING

Manual/remote radio control

(option)

Operation

27.04.2020

140.5.204 Telescopic crane

441

Reference

Only

Содержание 140.5.204






























































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 140.5.204

Отзывы:

Бренды по названию

Популярные бренды

Manitowoc 140.5.204, Руководство по эксплуатации

Результаты поиска

Содержание 140.5.204

Отзывы:

Бренды по названию

Популярные бренды