Manitowoc 140.5.204 Скачать руководство пользователя страница 436

Страница: 436 / 669

Press button

The horn is triggered.

An acoustic signal will sound.

Press button on the right (at least 2

seconds)

Press button on the right (at least 2

seconds)

The engine is started.

The engine is stopped.

7.7.3 Turning on the diesel filter heating

The diesel filter heating can be used for pre-warming of the diesel

filter at low temperatures. If the coolant temperature drops below

5 °C (41 °F), the manufacturer recommends switching on the

diesel filter heater.

Requirement:

The

[Coolant temperature]

display on the SENCON indicates

that the coolant temperature is too low.

Turn the

[Diesel filter heating]

to the right.

The

[Exhaust temperature]

information symbol lights up

orange until the fuel has reached its operating tempera-

ture.

Requirement:

The

[Exhaust temperature]

information symbol is gray.

Turn the

[Diesel filter heating]

to the left.

Horn

Engine start

Turning on the diesel filter heating

Switching off the diesel filter heater

Operation

27.04.2020

140.5.204 Telescopic crane

436

Reference

Only

Содержание 140.5.204






























































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 140.5.204

Отзывы:

Бренды по названию

Популярные бренды

Manitowoc 140.5.204, Руководство по эксплуатации

Результаты поиска

Содержание 140.5.204

Отзывы:

Бренды по названию

Популярные бренды