Manitowoc 140.5.204 Скачать руководство пользователя страница 431

Страница: 431 / 669

Ensure unobstructed view. Clean the rear-view mirror as nec-

essary.

Adjust the rearview mirror. The work area behind the

machine must be easily visible from the operator's seat posi-

tion.

7.7 Switching on the machine

Risk of injury due to sudden machine movement or uninten-

tional start-up.
–

Do not leave the machine unattended with the engine run-

ning.

–

Park the machine on secure ground.

–

Move the machine away from the edge of any trenches or

pits.

–

Lower attached loads and the boom to the ground.

–

Engage the slewing gear brake.

–

Turn off the machine and secure it against unauthorized

restart.

Sudden machine movements or unintentional machine start-

up can result in death or serious injury for persons on or near

the machine.

Risk of injury inside machine hazard area!
–

The operator must ensure no one is in the hazard area

before putting the machine into operation.

–

Keep a safe distance from the danger zone.

–

The operator should warn persons of any hazards.
–

Shut down the machine if persons do not leave the

danger zone despite this warning.

–

Only the operator should be in the cab while the machine

is in operation.

–

If the operator's view is restricted while driving and

working, the operator must be guided.

–

Cordon off the area between solid structures and the work

area of the machine.

Persons in the danger zone can be crushed by the machine

while it is in operation or struck by falling parts. This can

result in serious injury or even death.

7.7.1 Preparing for machine start-up

Ensure all personnel is outside the danger zone.

Secure loose items in the cab, such as tools or other acces-

sories.

Make sure all control levers are in neutral position.

WARNING

Operation

27.04.2020

140.5.204 Telescopic crane

431

Reference

Only

Содержание 140.5.204






























































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 140.5.204

Отзывы:

Бренды по названию

Популярные бренды

Manitowoc 140.5.204, Руководство по эксплуатации

Результаты поиска

Содержание 140.5.204

Отзывы:

Бренды по названию

Популярные бренды