manualshive.com logo in svg

Manitowoc 140.5.204, Руководство по эксплуатации

Поделиться
Скачать
Manitowoc 140.5.204 Скачать руководство пользователя страница 354

5.

Completely fold out the fly boom extension.

6.

Mount and secure the bolts between the fly boom extension

and fly boom on the left-hand side.

6.7.4.8 

Folding the fly boom with folded-in fly boom extension into transport position

Requirement:

n

Uppercarriage is at 0°.

n

The boom is fully retracted.

n

The boom is lowered to 0°.

n

The hoisting rope is unreeved.

n

The deflection sheave is mounted on the boom.

n

The 

Setup attachment

 setup mode is set on the SENCON.

n

The holding function is enabled.
The safety lever is pushed in direction of travel.

n

The pilot ramp is folded out.

Start-up and setup

27.04.2020

140.5.204 Telescopic crane

354

Fo

r

 

Reference

 

Only

Содержание 140.5.204






























































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды