Manitowoc 140.5.204 Скачать руководство пользователя страница 339

Страница: 339 / 669

6.7.4.6

Folding the fly boom with fly boom extension into transport position

Danger of falling.
–

Do not climb onto the boom or the attachments.

–

Do not climb onto equipment parts (for example, boom

sections, ballast parts) hanging from a crane.

–

Use secure climbing equipment when bolting the attach-

ments.

–

Depending on the work height, use a ladder in accordance

with the applicable standards and regulations.

Folding in the fly boom requires sufficient space on the right-hand

side of the machine.

Data

Value Unit

Swing clearance of the fly boom

12 m

Swing clearance of the fly boom

39.4 ft

Machine operator

Instructed personnel

Ladder

Rope

Requirement:

Uppercarriage is at 0°.

The boom is fully retracted.

The boom is lowered to 0°.

The hoisting rope is unreeved.

The deflection sheave is mounted on the boom.

The

Setup attachment

setup mode is set on the SENCON.

The holding function is enabled.
The safety lever is pushed in direction of travel.

The pilot ramp is folded out.

WARNING

Space requirements for setting up

Personnel

Tools

Start-up and setup

27.04.2020

140.5.204 Telescopic crane

339

Reference

Only

Содержание 140.5.204






























































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 140.5.204

Отзывы:

Бренды по названию

Популярные бренды

Manitowoc 140.5.204, Руководство по эксплуатации

Результаты поиска

Содержание 140.5.204

Отзывы:

Бренды по названию

Популярные бренды