Manitowoc 140.5.204 Скачать руководство пользователя страница 290

Страница: 290 / 669

The engine cannot be started from the cab with the ignition key or

the push button.

Open the

“Setup”

menu page on the SENCON.

Press the

[Ballasting mode]

quick-select button on the

SENCON.

The status indicator for the quick-select button is black.

The ballasting mode is switched off.

The machine is controlled using the controls in the cab.

The engine can be started from the machine.

Grey

Red

The emergency stop is not actuated.

All machine functions are available.

The emergency stop is actuated.

The engine and all machine movements have

been stopped.

Yellow bar

Black bar

The ballasting mode is activated.

The Setup remote radio control is used to con-

trol the machine during certain setup proce-

dures.

The ballasting mode is deactivated.

The machine is controlled using the controls in

the cab.

6.6.8 Attaching the hoist rope

6.6.8.1

Attaching the winch brake

The winch brake is not attached when the machine is delivered.

Attach the winch brake before initial start-up.

Emergency stop

Ballasting mode

Start-up and setup

27.04.2020

140.5.204 Telescopic crane

290

Reference

Only

Содержание 140.5.204






























































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 140.5.204

Отзывы:

Бренды по названию

Популярные бренды

Manitowoc 140.5.204, Руководство по эксплуатации

Результаты поиска

Содержание 140.5.204

Отзывы:

Бренды по названию

Популярные бренды