Manitowoc 140.5.204 Скачать руководство пользователя страница 243

Страница: 243 / 669

5.4.10

Resetting a fault message

Fig. 22: Resetting a fault message using the "Active Faults Machine" example

When a new fault message occurs, the acknowledged fault mes-

sage will be displayed again, unless the fault has been corrected in

the meantime.

5.5 Operating modes

There are various machine operating states for which a valid oper-

ating mode has to be set.

Traveling

Setup mode

Work mode

5.5.1 Traveling

In travel mode, the machine is moved between the transport

vehicle, construction sites, and work sites at zero load. The

machine can be moved with maximum, medium, or minimum track

width, as well as with or without counterweight, subject to compli-

ance with specific conditions.

No specific operating mode is selected to move the machine

between the transport vehicle, construction sites, and work sites.

The machine parameters are not monitored.

Chapter 7.13.1 “Work site and tracks” on page 463

Chapter 7.13.2.1.1 “Conditions for moving the machine in travel

mode” on page 464

Further notes

Control and display elements, operating modes

27.04.2020

140.5.204 Telescopic crane

243

Reference

Only

Содержание 140.5.204






























































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 140.5.204

Отзывы:

Бренды по названию

Популярные бренды

Manitowoc 140.5.204, Руководство по эксплуатации

Результаты поиска

Содержание 140.5.204

Отзывы:

Бренды по названию

Популярные бренды